GSI Outdoors PNEG-951 - Manual (Page 26)

26 PNEG-951
HELP BUTTON
T h e button currently has no function.
T h e button is used to change the Dry timer settings when you operate your dryer in the Batch
mode. This button has no effect in the continous drying mode. Please refer to the Staged Batch section.
DRY BUTTON
COOL BUTTON
T h e button is used to change the Cool timer settings when you operate your dryer in the Batch
mode. This button has no effect in the continous drying mode. Please refer to the Staged Batch section for Batch
operation.
UNLOAD BUTTON
T h e button is used to change the Unload timer settings when you operate your dryer in the
Batch mode. This button has no effect in the continous drying mode. Please refer to the Staged Batch section for
Batch operation.
PLENUM BUTTON
The button allows you to view the plenum temperature of all the burners on your dryer. Press
ing the button allows you to change the plenum set point of the burner being viewed. Press
to advance to the next screen (burner) or to accept any changes you may have made.
GRAIN BUTTON
T h e button allows you to view or modify the moisture control (grain temperature) set point which
determines the final moisture content of the grain being discharged from the dryer. Press the
button to make any changes. Press to advance to the next screen or to accept any changes you may
have made.
MODIFY BUTTON
When viewing a screen with settings that can be changed, the button will allow you to edit the
values on this screen. Otherwise this button will have no function available.
INCREASE and DECREASE BUTTONS
The are used when you are editing temperature, time values or for scrolling up and
down the different screen selections.
ENTER BUTTON
Use the button to accept any changes you may have made to timer, delay or setup screens. It
is also used to advance to the next screen.