GSI Outdoors PNEG-951 - Manual (Page 73)

73 PNEG-951
changes press the button to accept them.
Note: If the wrong selection is made, your dryer will look for other safeties that will not be present causing
the dryer to be inoperable.
TEMPERATURE SCALE
This screen is used to toggle the temperature scale from Celsius to Fahrenheit. To change the scale
press the then press the to accept the changes.
FAN/HEATER SELECT
This screen allows you to change the burner characteristics from a Hi/Lo type of burner to a On/Off type burner.
The On/Off burner mode can be useful when drying on very warm days
which may cause the dryer to never cycle from the Lo cycle.
Pressing the button will allow you to change the configuration of individual burners from On/Off to Hi/
Lo type burners.
To change the burner mode press buttons to toggle the burner setting then press the
button to accept the changes.