Reverse time, Forward time – GSI Outdoors PNEG-951 User Manual
Page 71
71
PNEG-951
To toggle this feature on or off use the
buttons then press the
button to accept the
changes.
You will activate 2 additional screens by selecting yes.
Reverse time
This screen changes the amount of time you want he meter rolls to run in the reverse (backwards) mode. 5
minutes is the default setting.
Pr ess
to change the reverse time or
to jump to the next screen.
Forward time
This screen changes the amount of time you want he meter rolls to run before switching to the reverse mode.
5 minutes is the default setting.
Pr ess
to change the reverse time or
to jump to the next screen.
Note: This feature is only available on software version 1.03 or higher.
SELECT UNLOAD METHOD
This is a feature that has not been implemented yet into the dryer software, leave this setting at 2 speed. Chang-
ing it to 3 speed may cause your dryer unload system to fail.