GSI Outdoors PNEG-951 - Manual (Page 37)

37 PNEG-951
Load Delay
The load delay is used to delay the starting of the load auger when the dryer is unloading to prevent the load
auger from cycling to often. To change the setting of this delay follow these instructions:
1. Press the button.
2. Press the button.
3. Press the button to adjust the settings.
4. Press the button to accept the changes.
Out of Grain Timer
The Out of Grain timer should be set to the maximum time it takes for your dryer to refill during continious or
batch mode drying.
If the dryer runs out of grain while the load auger switch is in the auto position, the out of grain timer auto-
matically shuts off the dryer after the period of time preset on the timer.
1. Press the button. Press to bypass the first screen.
2. Press the button.