GE 27951 - Manual (Page 12)

1
Installing the Phone
Installing the Handset Battery
NOTE: You must connect the handset battery before use.
CAUTION: To reduce the risk of fire or personal
injury, use only the Thomson Inc. approved Nickel-
metal Hydride (Ni-MH) battery model 5-2734, that is
compatible with this unit.
1. Locate battery which is packaged inside a plastic bag and is
separate from the handset.
. Locate the battery compartment on the back of the handset.
. Plug the battery pack cord into the jack inside the
compartment.
NOTE: To ensure proper battery installation, the connector
is keyed and can be inserted only one way.
. Insert the battery pack.
5. Close the battery compartment by placing the handset back
cover slightly higher than the handset and then sliding the
cover down into position.