GE 27951 - Manual (Page 18)

18
NOTE: During programming, you may press the MUTE/
ringer on/off button at any time to exit the sub-menu
and return to the main menu, or press FLASH/exit to exit
programming and return to standby screen.
NOTE: If no key is pressed for 60 seconds, the handset will
automatically exit programming and return to standby screen.
Handset Setup
1. Make sure your phone is OFF (not in talk mode).
. Press the MENU button to go to the main menu.
. Press CID/VOL ( + or - ) button to scroll to Setup HS.
. Press MENU button to confirm and you may program the
following items: Ring Volume, Tones, Auto Talk, Handset Name
and Language.
Language
From the Setup HS Menu:
1. Press the
CID/VOL ( + or - ) button to scroll to the Language
sub-menu.
. Press MENU button to enter the menu.
. Use the CID/VOL ( + or - ) button to select English, Français or
Espanol. The default setting is English.
. Press the MENU button to save your selection.
Ring Volume
There are  volume levels for your selection. They are Volume 1 to
 and Ringer off respectively.
From the Setup HS Menu:
1. Press the
CID/VOL ( + or - ) button to scroll to the Ring Volume
sub-menu.