GE 27951 - Manual (Page 21)

1
NOTE: If you make a mistake, press CID/VOL ( + or - ) button
to move the cursor forward or backward, then use the
MUTE/ringer on/off button to backspace and delete one
character at a time.
NOTE: * key is a function key to toggle between the upper
case and low case of characters during text edit.
. Press the MENU button to save your name. You will hear a
confirmation tone and the display shows Saved.
Base Station Setup
1. Make sure your phone is OFF (not in talk mode).
. Press the MENU button to go to the main menu.
. Press CID/VOL ( + or - ) button to scroll to Setup BS.
. Press MENU button to confirm and you may program the
following items: Area Code and Dial mode.
Area Code
The telephone uses the pre-programmed area code to determine
the number format to display when a valid Caller ID record is
received. The pre-programmed area code is also used for the
Dialback feature.
From the Setup BS Menu:
1. Press the
CID/VOL ( + or - ) button to scroll to the Area code
sub-menu.
. Press MENU button to enter the menu. Enter area code shows
in the display.
. Use the touch-tone pad to enter your -digit area code.
. Press
MENU button to save the setting.