GE 27951 - Manual (Page 20)

0
key Tone - You may set the key tone to “On” or “Off” when you
press buttons. Press the CID/VOL ( + or - ) button to scroll to On
or Off, then press MENU button to save the setting. The default
setting is On.
Auto Talk
This option allows you to pick up the handset from base to answer
an incoming call without pressing the TALk/END button.
From the Setup HS Menu:
1. Press the
CID/VOL ( + or - ) button to scroll to the Auto Talk sub-
menu.
. Press MENU button to enter the menu. Use the CID/VOL ( + or
- ) button to scroll to your selection. The default setting is On.
. Press the MENU button to save your selection.
Handset Name
From the Setup HS Menu:
1. Press the
CID/VOL ( + or - ) button to scroll to the Handset
name sub-menu.
. Press MENU button to enter the menu. The default setting is
Handset.
. Use the touch-tone pad to enter a name (up to 1 characters).
More than one letter is stored in each of the number keys. For
example, to enter Bill Smith, press the  key twice for the letter
B. Press the  key  times for the letter I. Press the 5 key  times
for the letter L. Press the 5 key  times for the second letter
L, and press the 1 key to insert a space between the first and
last name. Press the 7 key  times for the letter S; press the 6
key once for the letter M; press the  key  times for the letter
I; press the 8 key for the letter T; press the  key twice for the
letter H.