GE 27951 - Manual (Page 19)

19
. Press MENU button to enter the menu. Use the CID/VOL ( + or
- ) button to scroll to your selection. The default setting is VOL 3.
. Press the MENU button to save your selection and Saved shows
in the display.
NOTE: Ringer can be disabled by pressing the MUTE/ringer
on/off button in standby mode, please refer to “Ringer
On/Off”.
Tones
From the Setup HS Menu:
1. Press the
CID/VOL ( + or - ) button to scroll to the Tones sub-
menu.
. Press MENU button to confirm and you may program the
following items: Low Battery, No Coverage and Key Tone.
. Use the CID/VOL ( + or - ) button to scroll to the item you want
to program and press MENU button to enter.
Low Battery - You may set the warning beep to “On” when your
handset battery is low, so as to alert you to charge the battery.
Press the CID/VOL ( + or - ) button to scroll to On or Off, then
press MENU button to save the setting. The default setting is
On.
No Coverage - You may set the warning beep to “On” or “Off”
when the handset is out of range. Press the CID/VOL ( + or - )
button to scroll to On or Off, then press MENU button to save
the setting. The default setting is On.
NOTE: When the handset is in the idle (off) mode and is out
of range from the base unit the display shows Searching. If
the TALk/END button is pressed, the display briefly shows
Unavailable then returns to Searching.