GE 27951 - Manual (Page 34)


Receiving CID Records
When you receive a call, the Caller ID information is transmitted
between the first and second ring. The Caller ID information
appears on the display while the phone rings, giving you a chance
to monitor the information and decide whether or not to answer
the call.
Storing CID Records (In CID Memory)
If you are not at home or cannot answer, your telephone’s Caller
ID memory stores the data for the 0 most recent calls (up to 0
digits and 15 characters for each record) you received so you can
see who called while you were unavailable. And the display shows
New calls, as a reminder that there are unanswered calls. When
the 1st call is received, the oldest Caller ID record (1st call) is
automatically deleted.
You may review the stored information at any time. Calls received
since your last review show as NEW in the display. Calls that have
not been previously reviewed but were received from the same
number more than once show as RPT in the display.
Reviewing CID Records
As calls are received and stored, the display is updated to let you
know how many calls have been received. To scroll CID records:
1. Make sure the phone is
OFF (not in talk mode).
. Press the CID/VOL ( + ) button to review the oldest call and
scroll toward the most recent calls.
. Press the CID/VOL ( - ) button to review the newest call and
scroll toward the older calls.
NOTE: When you reach the end of records, --End of list-- shows
in the display.
NOTE: If no calls have been received, Empty shows in the
display for 2 seconds at the time the CID/VOL ( + or - ) button is
pressed.