GE MULTILINK ML2400 - Manual (Page 293)

CHAPTER 17: MISCELLANEOUS COMMANDS MISCELLANEOUS COMMANDS
MULTILINK ML2400 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL 17–21
• save
• whoami : display the user information
• reboot
• authorize
• degrade
• exportlog mode
• ftp
• help
• ipconfig
• kill
• kill session id
• logout : logs out from the current user
• ping : to send the ping requests
• tftp
• telnet : connects to the remote system through telnet
• terminal : to set the terminal size
• xmodem
17.9.2 Configuration commands
The access commands are shown below.
• allow : allows the IP address
• deny : denies the IP address
• dhcp : enables or disables the DHCP
• modbus : enables or disables access to Modbus map
• remove
• removeall
• snmp : enables or disables SNMP
• ssl
• telnet
• web
The alarm commands are shown below. Refer to Alarm Relays on page 17–1 for details on
using these commands.
• add
• alarm
• del
• period
The authorization commands are shown below.
• auth
• authserver
• backend