4 updating through the enervista software, Pdating, Through – GE MULTILINK ML2400 User Manual
Page 38: Enervista, Oftware
1–28
MULTILINK ML2400 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
INTRODUCTION
CHAPTER 1: INTRODUCTION
1.7.4
Updating through the enervista Software
Use the following procedure to install the EnerVista Secure Web Management software.
Z
Download the latest MultiLink firmware from the GE Multilin web site.
Z
Save this file on FTP or TFTP. Ensure the FTP or TFTP path is
configured. If using FTP, record the FTP login name and password.
Z
Select the switch to upgrade. Ensure you have system administration
privileges available on the switch.
Z
Open a EnerVista Secure Web Management software session with
the switch by typing in the following URL:
https://<IP address of the switch>
If using FTP, save the configuration before proceeding. GE Multilin recommends a two-step
update: first save the configuration to the ftp server, then load the new image and restart
the switch (refer to Saving Configuration on page 5–20 for details on saving the
configuration).
Z
Load the new firmware as shown below.
As the file is being loaded, the firmware will display the transfer in progress window.