GE MULTILINK ML2400 User Manual
Page 37
CHAPTER 1: INTRODUCTION
INTRODUCTION
MULTILINK ML2400 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
1–27
Refer to Saving Configuration on page 5–20 for details on the
xmodem
command.
Once the upgrade is started, the terminal emulation firmware will ask for the installation
file location.
Z
Indicate the file location to begin the file transfer.
Z
Make sure the Xmodem protocol is also selected in this file location
dialog window.
In some operating systems it maybe necessary to select the transfer option.
In this case,
Z
Return to the HyperTerminal window used in step 5.
Z
Select the Transfer > Send File menu item.
Z
As shown below, enter the location of the new firmware file.
Z
Select the Xmodem protocol.
Z
Select the Send button and to begin the file transfer.
Z
Once the file transfer is completed reboot the switch with the
reboot
command or by cycling power.
Z
Login to the switch and use the
show version
command to verify
and upload the configuration file (if necessary).