GPX X642 User Manual
Page 133
133
8
Load the dark colored paper.
a
Place a blank piece of dark colored paper (A4 or Letter) on the scanner glass (flatbed).
Position the paper so it is aligned with the upper corner of the plastic guides.
b
Close the document cover.
c
Place a blank piece of dark colored paper (A4 or Letter) in the ADF, and adjust the guides.
Make sure the paper guides are snug against the paper; do not bend the paper.
9
Press Start.
The registration process scans the pages in the scanner glass (flatbed) and ADF, and then
display a success or failure message.
If a failure message appears, do another scanner registration, realign the paper, and verify
each step as it is performed. If a second failure message appears, contact an authorized
service representative.
10
Touch Exit Configuration Menu.
The printer will reboot and return to the home page.