GPX X642 - Manual (Page 154)

154
200 and 201 Paper Jam Remove Cartridge
1 Push the release latch, and lower the multipurpose feeder.
2 Push the release latch, and open the top front cover.
3 Lift and pull the print cartridge out of the MFP.
Warning: Do not touch the photoconductor drum on the underside of the cartridge. Use the
cartridge handle whenever you are holding the cartridge.
4 Place the print cartridge aside.
Note: Do not leave the cartridge exposed to light for extended periods.
Note: The print media may be covered with unfused toner, which may stain garments and
skin.
CAUTION: The inside of the MFP may be hot. Allow the MFP to cool
before touching any internal components.