GPX X642 - Manual (Page 16)

16
7 Start Press to initiate the current job indicated on the
control panel.
From the home screen, press it to start a copy job
with the default settings.
If pressed while a job runs through the scanner, the
button has no effect.
8 Stop Press to cause the printing or scanning to stop.
During a scan job, the scanner finishes scanning
the current page and then stops, which means
paper may remain in the automatic document
feeder (ADF).
During a print job, the print media path is cleared
before the printing stops.
Stopping appears on the control panel during this
process.
9 Backspace Within the Copy menu, which is accessed by
touching the Copy button, press Backspace to
delete the right-most digit of the value in the Copy
Count. The default value of 1 appears if the entire
number is deleted by pressing Backspace
numerous .
Within the Fax Destination List, press Backspace to
delete the right-most digit of a number entered
manually. It also deletes an entire shortcut entry.
Once an entire line is deleted, another press of
Backspace causes the cursor to move up one line.
Within the E-mail Destination List, press
Backspace to delete the character to the left of the
cursor. If the entry is in a shortcut, the entire entry
is deleted.
10 Asterisk (*) * is used as part of a fax number or as an
alphanumeric character.
11 Home Returns the control panel to the Home screen. See
the “Home screen and Home screen buttons” on
page 18 for more information.
12 Help Tips Accesses the context-sensitive Help feature which
are help screens containing more information.
13 Menu Accesses the menus. These menus are only
available when the MFP is in the Ready state.
Callout Control panel item Function