GPX X642 - Manual (Page 37)

37
Placing separator sheets between copies
1 Place the original document in the automatic document feeder facing up, short-edge first.
2 Adjust the paper guides.
3 Touch Copy.
4 Touch Options.
5 Touch Separator Sheets.
Note: Collation must be On for the separator sheets to be placed between copies. If
Collation is Off, the separator sheets are inserted after the job has been printed.
6 Touch Copy It.
Setting paper saving options
1 Place the original document in the automatic document feeder facing up, short-edge first.
2 Adjust the paper guides.
3 Touch Copy.
4 Make your duplex choice.
5 Touch Options.
6 Touch Paper Saver.
7 Select the output you want.
For example, if you have four portrait-oriented original documents that you want copied to the
same side of one sheet, touch 4 on 1 Portrait.
8 Touch Print Page Borders if you want a box drawn around each page on the copies.
9 Touch Copy It.