GPX X642 - Manual (Page 84)

84
finisher affects how letterhead documents should be loaded for duplexing. You can print simplex jobs
on letterhead (or other preprinted media) that has been loaded specifically for duplex printing by
changing the value in the Paper Loading menu.
To load print media:
Note: Do not add or remove print media when the MFP is printing from the multipurpose
feeder or when the control panel indicator light is blinking. Doing so may cause a
jam.
1 Push the release latch, and lower the multipurpose feeder.
2 Pull the tray extension out.
Note: Do not place objects on the multipurpose feeder. Also, avoid pressing down or
applying excessive force on it.
3 Slide the width guide to the far right.
Simplex
letterhead Duplex
letterhead Envelope