GE 45608 - Manual (Page 10)

10
4. Use the ARROW keys to view codes of other devices you have
set up.
5. After viewing the codes, press OK or SET to exit.
Replacing a Device
This replaces an existing device with a new device in your remote’s
programming. One example could be replacing your cable box
with a satellite receiver.
NOTE: The new device replaces and overwrites all settings of
the current device (Key Mover, Learning, and all other user-
programmed features). The one exception is with macros. The
new device code replaces the old device code within the macro.
1. From INITIAL SETUP press OK. The remote displays ADD DEVICE.
Use the ARROW keys to scroll to REPLACE DEVICE and Press OK.
2. The LCD displays REPLACE WHAT? on line 1 and the current
device type in the middle of line 2. Use the ARROW keys to scroll
to the device to replace.
3. Press OK to select the device type to replace. The LCD displays
WITH WHAT DEVICE? on line 1 and the current device (for
example, RCV) on line 2.
4. Use the ARROW keys to scroll to the new device type you want
to use.
5. When you have selected the replacement device, press OK.
6. The LCD displays the device code and its default ID. For
example, for a cable box the LCD displays CABLE BOX, CODE
SETUP, 1376. Press OK to complete the code setup and store the
new device.
Advanced Functions (Audio/Video Devices)
To Access the Advanced Functions Menu:
1. With the remote in A/V mode, press and hold the SET key to
enter setup.
2. Use the ARROW keys to scroll to “ADVANCED FUNCTIONS”
and press OK.
Advanced Functions
Set
Clock
Set Volume
Control
Key
Mover
Key
Macro
Reset
Remote
Learn
Functions
Contrast
LCD
Timer