GE 45608 - Manual (Page 26)

26
Z-Wave Setup
Devices / Lights / Nodes
Adding a Device (Node / Light) to the Network
In order to control the lights, they must be Z-Wave enabled and
you must first add them to your home network. There are two
ways to do this.
1. Add lights to your remote so that they can be controlled
individually using the number keys (maximum of 18). Adding
a device to your remote also adds it to your network. If the
device number you are trying to add is already associated with
another device, the previous information is lost.
With the remote in Z-Wave mode, press & hold the
SET Key for the following menu options:
About Z-Wave
Light
Setup
Group
Setup
Scene
Setup
All
Setup
Transfer
Z-Wave Setup
Thermostat
Network Events Advanced
Config.
Light Setup
Add Remove Delete Label
To Network
To A Key