Receiving network and device information – GE 45608 User Manual

Page 41

Advertising
background image

41

6. Place the Secondary remote in RECEIVE mode. See the

following section on “Receiving Network and Device
Information” if the Secondary remote is a GE 45608 remote.
If the Secondary remote is a different GE model or different
brand, please refer to its instructions for details.

7. After the Secondary remote is in the RECEIVE mode press

OK on the Primary remote; the screen will display SENDING.
The Primary remote then transmits the network and device
information to the new Secondary remote.

8. Both remotes should indicate a successful completion of the

copying process.

a. The 45608’s screen will display SUCCESSFUL.

b. Other GE models or other brands will indicate success in

various ways, depending on the remote’s capabilities.
Please refer to its instructions for details.

Receiving Network and Device Information

1. Enter Z-Wave setup mode and highlight TRANSFER

2. Press OK; the screen will display CREATE SECONDARY

3. Use the ARROW keys to scroll to RECEIVE.

4. Press OK; the screen will display RECEIVING

5. Place the Primary remote in “Transmit” mode. See the previous

section on “Creating a Secondary Controller” or “Controller
Swap” if the Primary controller is a GE 45608 remote. If the
Primary remote is a different GE model or different brand,
please refer to its instructions for details.

6. After the Primary remote is in the “Transmit” mode, press OK

on this remote; the screen will display RECEIVING. The Primary
remote then transmits the network and device information to
the new remote.

7. Both remotes should indicate a successful completion of the

copying process.

a. The 45608’s screen will display SUCCESSFUL.

b. Other GE models or other brands will indicate success in

various ways, depending on the remote’s capabilities. Please
refer to its instructions for details.

Advertising
This manual is related to the following products: