GE 45608 - Manual (Page 12)

12
4. The remote displays LOCK VOLUME. Press OK.
5. The remote displays USE < > TO SELECT VOLUME SOURCE
THEN PRESS OK.
6. Use the ARROW keys to select the device to be locked. The
remote displays the name of the device and its code (for
example, LOCK VOLUME TO RECEIVER 1158).
7. Press OK. The display changes to VOLUME CONTROL IS NOW
SET TO RECEIVER.
8. The display automatically changes to LOCK VOLUME after a
few seconds. Press SET to exit.
Adding a Device to Volume Lock
1. From LOCK VOLUME, use the ARROW keys to scroll to ADD
DEVICE TO VOLUME LOCK and Press OK.
2. The remote displays USE < > TO FIND DEVICE TO ADD THEN
PUSH OK. Use the ARROW keys to scroll to the device you want
to lock. The remote now displays the name of the device being
locked and the name of the locking device. For example, LOCK
TV2 TO RECEIVER.
3. Press OK. The remote now displays TV2 HAS BEEN ADDEDTO
VOLUME LOCK.
4. The display automatically changes to VOLUME LOCK after a
few seconds. Press SET to exit.
Removing a Device from Volume Lock
1. From LOCK VOLUME, use the ARROW keys to scroll to REMOVE
DEVICE FROM VOLUME LOCK and Press OK.
2. The remote displays USE < > TO SELECT FIND DEVICE TO
REMOVE THEN PUSH OK. Use the ARROW keys to select the
device to remove. The remote now displays REMOVE FROM
VOLUME LOCK and the abbreviated device name (TV2 for
example).
3. Press OK. The remote’s display changes to TV2 HAS BEEN
REMOVED FROM VOLUME LOCK.
4. The display automatically changes to REMOVE DEVICE FROM
VOLUME LOCK after a few seconds. Press OK to remove
another device from Volume Lock, or press SET to exit.