GE 45608 - Manual (Page 18)

18
Deleting a Single Learned Key
To delete a single learned key, follow steps 1–3 above.
Then perform the following steps:
1. Press the key containing the learned function to be deleted. The
remote displays KEY DELETED PUSH OK TO DELETE ANOTHER.
2. Press SET to exit or OK to delete another learned key.
Setting the LCD Display’s Contrast
1. From ADVANCED FUNCTIONS, scroll to CONTRAST. Press OK.
2. The LCD displays CONTRAST SETUP, with 10 blocks to show
the CONTRAST setting. Use the ARROW keys to raise or lower
the setting.
3. Press OK to save.
Adjusting the LCD Timer
You can adjust the LCD timer to control how long your display runs
before it times out and goes blank. The timer can be adjusted in
increments of 10, 20, or 30 seconds.
NOTE: This does not affect backlight settings. The backlight runs
for 10 seconds on your display, and 5 seconds on your keypad.
1. From ADVANCED FUNCTIONS, scroll to LCD TIMER. Press OK.
2. The LCD displays SET TO 20 SECONDS (or the timer of the last
active setting). Use the ARROW keys to adjust the LCD Time-
out period.
3. Press OK to save. The LED blinks twice and the display returns
to LCD TIMER.
Advanced Functions
LCD Timer Contrast