GE 45608 - Manual (Page 34)

34
Adding or Excluding a Device To / From All Control
Menu options under ALL SETUP include EXCLUDE ALL ON OFF,
INCLUDE ALL ON OFF, EXCLUDE ALL ON ONLY and EXCLUDE ALL
OFF ONLY.
1. Enter Z-Wave setup mode and highlight ALL SETUP.
2. Press OK; the screen will display EXCLUDE ALL/ON OFF
3. Use the ARROW keys to scroll to the desired action.
4. Press OK; the letter “W” will be displayed in the upper left hand
corner and the Z-Wave light will begin blinking indicating the
remote is waiting to communicate with your device.
5. Press the button on the device so that it communicates with
the remote.
6. When the screen displays SUCCESSFUL you have successfully
completed the desired action.
Events
The GE 45608 LCD remote allows you to program automated
events such as turning on or off lights at a predetermined time
and day. An event can control an individual Light, a Group or a
Scene.
Note: Prior to programming an Event, you must set the day
and time.
Adding an Event
1. Enter Z-Wave setup mode and highlight EVENTS.
2. Press OK; the screen will display ADD
3. Press OK; the screen will display EVERYDAY
4. From this screen you can use the right and left arrow keys to
select the day or days you would like the event to occur. The
selections are;
a. EVERYDAY(The event will occur everyday)
b. MON – FRI (The event will occur Monday thru Friday)
c. SAT/SUN (The event will only occur on Saturday and Sunday)
d. ONETIME (The event will only occur onetime)
Events
Add Delete All Event View