Graham Field ALTADYNE 765000 - Manual (Page 11)

765000-INS-LAB-RevB10 11
Maxfirm button: The pump will automatically enter
maxfirm mode every time the power is turned on. Maxfirm
mode ensures the pump is able to reach its maximum oper-
ating pressure. Maxfirm mode will last for 20 minutes, and
then the system will automatically enter auto-adjust mode.
To disable maxfirm mode, press the maxfirm button. When
enabled, the maxfirm indicator, at left of button, illuminates.
Front panel, third row
Panel lock button: The panel lock button sets the
panel lock to protect the panel settings from accidental
change. Press for two seconds to lock; press FIRMLY for
two seconds to unlock. After the panel has been untouched
for five minutes, the panel lock locks automatically. When
the panel is locked, the panel lock indicator will illuminate.
Power (ON/OFF) button: The power button turns
power to the mattress system ON or OFF. Press to turn ON;
press to turn OFF. When power is on, the power (ON/OFF)
indicator will illuminate. When power is turned OFF, the
mattress system will slowly deflate.
Note: Main power switch on side of pump, previously shown
in
PUMP: REAR, must be ON in order for the front panel
power button to function.
Alarm Mute button: The alarm mute button temporar-
ily suspends the LED indicator and buzzer when either
the low-pressure alarm or power failure alarm is activated.
Should the problem not be resolved within three minutes,
the alarm will resume.