Graham Field ALTADYNE 765000 - Manual (Page 13)

765000-INS-LAB-RevB10 13
INSTALLATION
UNPACKING
1. Carefully remove all components from the carton.
2. Inspect all components.
3. If damage is evident to the contents, please notify the
carrier and your Graham-Field equipment provider.
PUMP AND MATTRESS SETUP
1. Remove all sheets, blankets, and pillows from the bed.
2. Place the mattress on top of the
bed frame; ensure that the foot
end symbol faces up at foot end as
shown at right. Secure mattress to
bed with straps.
3. Fold open the wire hangers on
the back of the pump as shown at
right.
4. Either hang the pump on the bed's
foot end, as shown at right, or
place the pump on a flat surface
easily accessible to the caregiver
and/or doctor.
Caution: Place the device in a
position where the caregiver and/
or doctor can access it easily.
5. Connect the mattress-pump air
hose quick connector; ensure that
the connector has clicked securely
into place before continuing.
Caution: Ensure that the air hoses are not kinked or
tucked under the mattress.
hanger