Graham Field ALTADYNE 765000 - Manual (Page 9)

765000-INS-LAB-RevB10 9
PUMP: FRONT PANEL
Front panel of pump is shown below. Descriptions of but-
tons and indicators follow.
Tuning button;
indicators at left of button
Power failure indicator
Alarm mute button
Service indicator
Power (ON/OFF) button;
indicator at right of button
Panel lock button;
indicator at right of button
Maxfirm button
Auto-Adjust button;
indicators at right of button
Low pressure
indicator
Therapy adjust button;
indicators at right of button
Front panel, first row
Auto-Adjust button: The auto-adjust button
adjusts the mattress pressure automatically based on the
patient's weight. To remind the user that the auto-adjust
process is ongoing, the auto-adjust indicator LEDs will
periodically flash from left to right until the Ready LED illu-
minates to show the process is complete. Three conditions
trigger the auto-adjust function:
1. Press the auto-adjust button for two seconds; the mat-
tress system automatically readjusts pressure setting.
2. When initial mattress inflation is complete, the mattress
system automatically starts the auto-adjust function.
3. When the mattress system detects a significant change
in patient's weight on the mattress (e.g. patient egress
or ingress), the system automatically starts the auto-
adjust function.
When auto-adjust is complete, the Ready indicator will illu-
minate. To disable the auto-adjust function, press the auto-
adjust button until auto-adjust indicators de-illuminate.
Note: During the auto-adjust operation, it is normal for the
mattress system to cycle through a series of inflation and
deflation.