Graham Field ALTADYNE 765000 - Manual (Page 18)

18 765000-INS-LAB-RevB10
Fuse replacement
tool needed: small screwdriver
1. If you suspect a blown fuse, discon-
nect the plug from the wall outlet
immediately.
2. Use a small screwdriver to remove
the cover of the fuse holder (fuse lo-
cations are shown in picture at right).
3. Insert a new fuse of the correct rating (T1A/250V, VDE
approved).
4. Replace the fuse holder cover. Ensure that fuse holder
cover is securely installed.
Air filter replacement
tool needed: small screwdriver
1. Use a small screwdriver to remove
the air filter plate located at rear of
pump (filter location is shown in
picture at right).
2. Remove the filter. The filter is reus-
able, if not torn, and can be washed
gently with a mild detergent and
water. Dry the filter before use.
3. Replace the filter and cover. Ensure that filter cover is
securely installed. Replace the air filter regularly if it is
gray, torn, or the environment is dirty.
STORAGE
1. Lay the mattress out flat and upside down.
2. Roll from the head end toward the foot end.
3. Stretch the foot-end strap around the rolled mattress to
prevent unrolling.
4. Store mattress and pump in a dust-free environment
with no exposure to direct sunlight.
Caution: Do not fold, crease or stack the mattress.
fuse
filter