GBC Titan 1244WF - Manual (Page 18)

GBC 1264WF/1244WF Operation Manual
© 2006 General Binding Corporation Page 18
Display Control Panel-Continued
Top and Bottom Temperature
Use the up or down arrow keys to increase
or decrease the set temperature of the heat
rollers. The temperature shown on the
display is the temperature at which the unit
is attempting to attain. For example if the
unit is set to 200*F even though the actual
roller temperature may be higher or lower.
To view the actual temperature press
MEASURE.
Stop
The STOP button ceases the forward
rotation of the rollers.
Reverse
Pressing the REVERSE button causes the
rollers to turn in the reverse direction. The
rollers will only turn in reverse as long as
the REVERSE button is depressed.