GBC Titan 1244WF - Manual (Page 21)

GBC 1264WF/1244WF Operation Manual
© 2006 General Binding Corporation Page 21
Safety Shield-Continued
To remove the Safety Shield, first raise the
shield and locate the spring hinge pin on the
right side of the shield. Pull the pin to
release the shield from the laminator as
illustrated in the photo.
Feed Table
The Feed Table supports the product to be
laminated. It also prevents full access to the
roller nip (where the upper and lower roller
meet) of the laminator. Because of this the
laminator has been designed not to operate
when the Feed Table is removed. Re-install
the Feed Table before attempting to operate
the laminator.