GBC Titan 1244WF - Manual (Page 5)

GBC 1264WF/1244WF Operation Manual
© 2006 General Binding Corporation Page 5
WARRANTY
Limited 90- Day Warranty
GBC warrants to the original purchaser for a period of ninety
days on labor and one year on parts after installation that this
laminator is free from defects in workmanship and material
under normal use and service. GBC’s obligation under this
limited warranty is limited to replacement or repair, at GBC’s
option, of any part found defective by GBC without charge for
material or labor.
THIS LIMITED WARRANTY IS IN LIEU OF ALL
OTHER WARRANTIES EXPRESSED OR IMPLIED.
WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE ARE EXPRESSLY
EXCLUDED. ANY REPRESENTATIONS OR PROMISES
INCONSISTENT WITH, OR IN ADDITION TO, THIS
LIMITED WARRANTY ARE UNAUTHORIZED AND
SHALL NOT BE BINDING UPON GBC. IN NO EVENT
SHALL GBC BE LIABLE FOR ANY SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
WHETHER OR NOT FORESEEABLE.
This limited warranty shall be void if the laminator has been
misused; mishandled; damaged by negligence, by accident,
during shipment, or due to exposure to extreme conditions;
repaired, altered, moved, or installed by anyone other than GBC
or its authorized agents; or if incompatible film was used.
GBC’s obligation under this limited warranty does not include
routine maintenance, cleaning, adjustment, normal cosmetic or
mechanical wear, or freight charges.
Without limiting the generality of the previous paragraph,
GBC’s obligation under this limited warranty does not include:
1. Damage caused to the rollers by knives, razors, or other
sharp tools: by any foreign objects falling into the working
area of the laminator; or by cleaning the laminator with
solutions or materials that harm its surfaces;
2. Damage caused by adhesives; nor
3. Damage caused by lifting, tilting or attempting to position
the laminator other than rolling it on its castors across even
surfaces.
FOR EUROPEAN UNION RESIDENTS ONLY: This
guarantee does not affect the legal rights which consumers have
under applicable national legislation governing the sale of
consumer goods.
SPECIFICATIONS
Operating Speed 0 to 10 fpm (3.0m/min) MAX
Maximum Temperature 320°F (160°C)
Maximum Mounting
Thickness Main Roller-5/8 th in. (15 mm) Max.
Pull Roller-5/8 th in. (15mm)
Maximum Film Width
1264WF
1244WF
61 in. (155. cm.), 62 in. Pressure Sensitive Films
42 in. Max paper width. (107 cm.), 42 In. Pressure Sensitive Films.
Dimensions (W x D x H)
1246WF
1244WF
Unit alone: (Uncrated)
80 in. x 28in. x 51in. (203 cm. x71 cm x 129 cm.)
60 in. x 28in. x 51in. (152 cm. x71 cm x 129 cm.)
Weight
1244 WF
1264 WF
Unit alone :
275 lbs (125 kg)
600 lbs (272 kg)
Electrical Requirements
US Models-
CE Models-
Refer to the serial plate located on the rear of the laminator for the specific electrical rating
applicable to the unit. Unit is rated for 220VAC-240AC. Do not exceed 240VAC. For best results it
is recommended that 230VAC be used.
230V, 30Amps, 60 HZ. Single Phase. 7000Watts 80.in x 28in. x 51in. (203 cm. x71 cm x 129 cm.)
230V, 15Amps, 50 HZ .Single Phase, 7000 Watts 80.in x 28in. x 51in. (203 cm. x71 cm x 129 cm.)
FCC NOTE FCC Class A Notice - Notification pour les Etats-Unis
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiated radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at their own expense.
Canada Class A Notice - Avis Canada, Class A
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Modifications
Any modifications made to this device that are not approved by General Binding Corporation may
void the authority granted to the user by the FCC and/or by Industry Canada to operate this
equipment.
Toutes modifications apportées à ce dispositif et non approuvées par General Binding Corporation
annuleront le droit accordé à l'utilisateur par le FCC et/ou par Industrie Canada de faire fonctionner
cet équipement.