GBC Titan 1244WF User Manual

Page 4

Advertising
background image

GBC 1264WF/1244WF

Operation Manual

© 2006 General Binding Corporation

Page 4

IMPORTANT SAFETY INSTRUCTIONS

YOUR SAFETY AS WELL AS THE SAFETY OF
OTHERS IS IMPORTANT TO GBC. IN THIS
INSTRUCTION MANUAL AND ON THE PRODUCT,
YOU WILL FIND IMPORTANT SAFETY MESSAGES
REGARDING THE PRODUCT. READ

THESE

MESSAGES CAREFULLY. READ ALL OF THE
INSTRUCTIONS

AND

SAVE

THESE

INSTRUCTIONS FOR LATER USE.

THE SAFETY ALERT SYMBOL PRECEDES
EACH

SAFETY

MESSAGE

IN

THIS

INSTRUCTION MANUAL. THE SYMBOL
INDICATES A POTENTIAL PERSONAL
SAFETY HAZARD TO YOU OR OTHERS.
THE

FOLLOWING

WARNINGS

ARE

FOUND UPON THIS PRODUCT.

ADVERTENCIA

Attention

Avertissement

Riesgo de choque
eléctrico
No abra:
Adentro no hay
piezas reparables
por el usuario.
Mantenimiento
solamente por
personal calificado

Risque de
Secousseélectrique.
Ne pas ouvrir.
Pas de pièces
réparables par
l'utilisateur.
Entretien
seulement par
personnel qualifié.

Electrical shock
hazard.
Do not open.
No user serviceable
parts inside.
Refer servicing to
qualified service
personnel.

THIS SAFETY MESSAGE MEANS THAT YOU
COULD BE SERIOUSLY HURT OR KILLED IF YOU
OPEN THE PRODUCT AND EXPOSE YOURSELF
TO HAZARDOUS VOLTAGE.

THIS SAFETY MESSAGE MEANS THAT YOU
COULD BE BURNED AND YOUR FINGERS COULD
BE TRAPPED AND CRUSHED IN THE HOT
ROLLERS. CLOTHING, JEWELRY AND LONG
HAIR COULD BE CAUGHT IN THE ROLLERS AND
PULL YOU INTO THEM.

ADVERTENCIA

Attention

Avertissement

NAVAJA FILOSA.

Mantener manos y
dedos a distancia.

LAME
COUPANTE.

Tenir mains et
doigts à l'écart.

SHARP BLADE.

Keep hands and
clothing away.

THIS SAFETY MESSAGE MEANS THAT YOU
COULD CUT

YOURSELF IF YOU ARE NOT

CAREFUL.

WARNING:

THIS

SAFETY

ALERT

SYMBOL

PRECEDES

EACH

SAFETY

MESSAGE

IN

THIS

INSTRUCTION

MANUAL. THE SYMBOL INDICATES A
POTENTAL PERSONAL SAFETY HAZARD
TO YOU OR OTHERS.

WARNING:

DO

NOT

ATTEMPT

TO

SERVICE OR REPAIR THE 1264/1244 WF
LAMINATOR.

WARNING: DO

NOT CONNECT THE

LAMINATOR

TO

AN

ELECTRICAL

SUPPLY OR ATTEMPT TO OPERATE THE
LAMINATOR

UNTIL

YOU

HAVE

COMPLETELY

READ

THESE

INSTRUCTIONS.

MAINTAIN

THESE

INSTRUCTIONS

IN

A

CONVENIENT

LOCATION FOR FUTURE REFERENCE.

IMPORTANT SAFEGUARDS

WARNING: TO GUARD AGAINST INJURY
THE

FOLLOWING

SAFETY

PRECAUTIONS MUST BE OBSERVED IN
INSTALLATION

AND

USE

OF

THE

LAMINATOR.

General:

Keep hands, long hair, loose clothing, and articles such as
necklaces or ties away from the front of the heat and pull
rollers to avoid entanglement and entrapment.

The heat rollers can reach temperatures over 300˚F (150°C).
Avoid contact with the heat rollers during operation or shortly
after power has been removed from the laminator.

Keep hands and fingers away from the path of the sharp film
cutter blades.

Do not use the laminator for other than its intended purpose.

Avoid moving the Laminator on uneven floor surfaces. Never
tilt the laminator.

Do not defeat or remove electrical and mechanical safety
equipment such as interlocks, shields and guards.

Do not insert objects unsuitable for laminating or expose the
equipment to liquids.

Electrical:

The Laminator should be connected only to a source of power
as indicated in these instructions and on the serial plate located
on the rear of the laminator. Contact an electrician should the
attachment plug provided with the Laminator not match the
receptacles at your location.

WARNING: THE RECEPTACLE MUST BE
LOCATED NEAR THE EQUIPMENT AND
EASILY ACCESSIBLE.

Do not operate the Laminator with a damaged power supply
cord or attachment plug, upon occurrence of a malfunction, or
after the laminator has been damaged. Contact GBC’s
Technical Service Department or your dealer/distributor for
assistance.

Service:

Perform only the routine maintenance procedures referred to in
these instructions

WARNING: DO NOT ATTEMPT TO SERVICE
OR REPAIR THE LAMINATOR

Disconnect the plug from the receptacle and contact GBC’s
Technical Department or your dealer/distributor when one or
more of the following has occurred.

The power supply cord or attachment plug is damaged.

Liquid has been spilled into the laminator.

The laminator is malfunctioning after being mishandled.

The laminator does not operate as described in these
instructions.

ADVERTENCIA

Attention

Avertissement

RODILLOS
CALIENTES.
PUNTO DE
PINCHAMIENTO.
Mantener manos y
ropa a distancia.

ROULEAUX
CHAUDS.
POINT DE
PINCEMENT.
Tenir mains et
vêtements à
l'écart.

HOT ROLLS.

PINCH POINT.

Keep hands and
clothing away.

Advertising
This manual is related to the following products: