Gibson Guitars 1550-07 GUS - Manual (Page 51)

49
CALIBRATING ROBOT TUNERS TM
The Robot Guitar will be pre-calibrated for a standard .010-.046 set of strings.
If you change
string gauges, restore factory defaults, or are installing the system yourself, you may first want
to calibrate the Robot Tuners
TM individually using the Motor Calibration Mode as described
below. Remember though, each Robot Tuner TM is self-regulated with a Dynamic Runtime
Algorithm that ensures the change of runtimes according to each string. After several tunings
the system will perfect itself automatically.
MANUAL CALIBRATION OF ROBOT TUNERS TM
Enter Setup Mode and turn to LED I, press display . The Peg and I LEDs will shine white.
Now you are ready to calibrate any or all of your Robot Tuners TM .
First, turn the MCK to the Robot Tuner TM you want to calibrate (selected strings are indicated
by solid blue) and press the display once. Strum the string and it will begin to alternate between
flashing red and green. Pause a few seconds and strum it again. Repeat this simple procedure
while the Robot Tuner
TM adjusts itself. When the LED for that string changes to the next string
in order, you know that the Robot Tuner TM you selected first is done. It’s that simple.