GE GEH6505A User Manual
WARNINGS, CAUTIONS, AND NOTES
AS USED IN THIS PUBLICATION
Warning notices are used in this publication to emphasize that hazardous voltages, cur-
rents, or other conditions that could cause personal injury exist in this equipment or
may be associated with its use.
Warning notices are also used for situations in which inattention or lack of equipment
knowledge could cause either personal injury or damage to equipment.
Caution notices are used for situations in which equipment might be damaged if care
is not taken.
Notes call attention to information that is especially significant to understanding and
operating the equipment.
This document is based on information available at the time of its publication. While
efforts have been made to ensure accuracy, the information contained herein does not
cover all details or variations in hardware and software, nor does it provide for every
possible contingency in connection with installation, operation, and maintenance.
Features may be described herein that are not present in all hardware and software
systems. GE Electrical Distribution & Control assumes no obligation of notice to
holders of this document with respect to changes subsequently made.
GE Electrical Distribution & Control makes no representation or warranty, expressed,
implied, or statutory, with respect to, and assumes no responsibility for the accuracy,
completeness, sufficiency, or usefulness of the information contained herein. No
warrantees of merchantability or fitness for purpose shall apply.
POWER LEADER™ is a registered trademark of GE Company.
Modbus RTU is a registered trademark of AEG Schneider Automation.
For details of the Modbus RTU protocol, refer to PI-MBUS-300 Rev. E from
Modicon/AEG Schneider Automation.
For details of RS485 communications, refer to the EIA-485 standard.
©Copyright 1996 GE Company
All Rights Reserved