Muratec QUADACCESS MFX-2550 - Manual (Page 110)

1
2
3
4
5
6
Printing F
rom
W
indows
Various Printing Methods 6-27
Adjust the density in “Print Density”.
5
To increase the density level, click [Darken]. •
To decrease the density level, click [Lighten]. •
You can also adjust the density level by dragging the slider in the center to the left or right. •
Click [Initialize] to return to the default setting. •
Click [OK] in the print settings dialog box.
6
The print settings dialog box is closed.
Click [Print].
7
Printing starts.