Muratec QUADACCESS MFX-2550 - Manual (Page 134)

1
2
3
4
5
6
Printing F
rom
W
indows
Driver Print Settings 6-51
Item Description
PostScript Pass
Through
*2
When PostScript Pass Through is enabled, functions such as watermark,
combine, and booklet printing may not be printed correctly in some
application software.
For some applications, this is because PostScript data sent to printer cannot
be controlled by the driver. In this case, disable “PostScript Pass Through”.
If you disable “PostScript Pass Through”, application software may perform
unexpected operations. It is recommended that you normally enable this
function.
Graphic enhanced
mode
*3
The processing of the image data may become slower or the printing may
not be performed correctly, depending on the application.
In such cases, printing may be able to be performed correctly by enabling
this setting.
However, it is recommended that you usually use the machine with this
setting disabled because it may cause printing to not be performed correctly.
To use this function, the optional “PCL 5e/6 print option” is required. *1
This setting can be specified when the optional “Muratec MFX-2550 PS” is selected for the *2
printer driver.
This setting can be specified when “Muratec MFX-2550” is selected for the printer driver.
*3