Muratec QUADACCESS MFX-2550 - Manual (Page 37)

2-22 Installing From the Add Printer Wizard
Select “Create a new port”, and select “Standard TCP/IP Port” from the pull-down
5
menu.
Click [Next].
6
Enter the IP address or DNS name in “Hostname or IP address”, enter a unique
7
port name in “Port name”, and click [Next].
If a device is not found with the specified IP address, the “Additional Port Information
Required” screen is displayed. Confirm that “Standard” and “Generic Network Card” are
selected in Device Type, and click [Next].
Click [Have Disk].
8
The “Install From Disk” dialog is displayed.