Setting the print controller, Setting example, Setting the print controller -4 – Muratec QUADACCESS MFX-2550 User Manual
Page 187: Setting example -4
Advertising
9-4 Setting the Print Controller
Setting the Print Controller
Note
This settings is used only when you cannot specify the settings on the print driver.
•
When settings are available on print driver, those settings will be used.
This setting is displayed only when the optional “
•
PCL 5e/6 print option” is installed
on the machine.
You can also set the print controller settings using OfficeBridge. For details, refer to
•
Chapter 3, “Specifying Default Machine Settings” in the OfficeBridge Guide.
Setting Example
Here the procedure for changing the default print orientation is described as an example.
Press <Setting>.
1
Press [Default Settings].
2
Press [Printer Settings].
3
Advertising