Muratec QUADACCESS MFX-2550 - Manual (Page 180)

1
2
3
4
5
6
7
8
Printing Using the Print Function
Printing Documents Saved in USB Memory 8-13
To specify the paper to use for printing, select a paper cassette.
7
To use the bypass tray, press the selection box for the bypass paper. •
To set the bypass paper, press [Bypass]. For details on the settings, refer to Chapter 1, “Paper •
Settings” in the Administrator’s Guide.
To sort the output, press [Sort].
8
Select the sorting method, and press [Enter].
9
For details on the sorting methods, refer to Chapter 1, “Basic Copy Settings” in the Copier
Guide.
If the document to print is an encrypted PDF, press [PDF Password].
10
Enter the password, and press [Enter].
11
Press <Start>.
12
To cancel the printing, press <Stop>.
When the message “Complete” is displayed on the screen, you can remove the
13
USB memory.