Muratec QUADACCESS MFX-2550 - Manual (Page 132)

1
2
3
4
5
6
Printing F
rom
W
indows
Driver Print Settings 6-49
„ Watermark Settings Dialog Box
You can click register, edit, or delete watermarks.
Item Description
Watermark Displays a list of the registered watermarks.
Add Click this to register a new watermark.
Edit Click this to edit the selected watermark.
Delete Click this to delete the selected watermark.
Name Enter the name to register for the watermark. (Maximum of 30 characters.)
Watermark String Enter a text string to be printed as the watermark. (Maximum of 30 characters.)
Fonts Select the font to use from the pull-down menu.
Size Set the size of the string (10 to 144 point).
Italic Select this to set the italic style for the string.
Bold Select this to set the bold style for the string.
Angle Select the angle for the string from the pull-down menu.
You can select the following angles for the string:
Horizontal / Vertical / Diagonal / User Set
If you select “User Set”, you can set a custom angle. (Between -180 and 180 degrees)
Position Select “Center” or “User Set”.
If you select “User Set”, you can set a horizontal position (between -10.0 and
10.0) and a vertical position (between -10.0 and 10.0) based on the center of
the paper.
Shading Select the density for the string from the pull-down menu.
You can select the following densities for the string:
10 % / 25 % / 50 % / 75 % / 100 %
For details on the procedure for setting watermarks, refer to “ Registering a Watermark ”. (See page
6-34.)