Muratec QUADACCESS MFX-2550 - Manual (Page 190)

1
2
3
4
5
6
7
8
9
Function Settings
Setting the Print Controller 9-7
Function Description Settings
CR / LF Set the operation to perform when CR / LF is
received. (Only available for PCL5) CR / LF only
CR + LF / LF only
CR only / LF + CR
CR + LF / LF + CR
Form Lines Sets the number of lines that can be printed
on a single page. (Only available for PCL5) Auto
Manual (5 to 128)
The font pitch and font size settings may not be available, depending on the font that is set. *1
Note
Underlined values are the default settings specified at the time of shipment.