Maytag MDG30MNV - Manual (Page 33)

113307 - 7 Maytag Co. 29
The exclusive fire suppression system will extinguish fires that may start in the drying basket (tumbler). A series
of sensors positioned throughout the basket (tumbler) and interfaced with the Phase 7 microprocessor controller
(computer) will trigger the fire suppression system water jet(s) to extinguish the flames quickly. The water jet(s)
remain on for 2 minutes and will automatically activate again if a fire condition remains or reignites. While the
water jet(s) are activated, the basket (tumbler) will jog to move the water throughout the load. Until the dryer is
attended to, the Phase 7 microprocessor controller (computer) will display that the system was activated.
BEFORE YOU START!
CHECK LOCAL CODES AND PERMITS
Call your local water company or the proper municipal authority for information regarding local codes.
IMPORTANT: It is your responsibility to have ALL plumbing connections made by a qualified
professional to ensure that the plumbing installation is adequate and conforms to local,
state, and federal regulations or codes.
IMPORTANT: It is the installer’s or owner’s responsibility to see that the necessary or required
water, water pressure, pipe size, or connections are provided. The manufacturer
assumes no responsibility if the fire suppression system is not connected, installed, or
maintained properly.
SECTION IX
FIRE SUPPRESSION SYSTEM
Fire Suppression System In Action