Marantz UD9004 - Manual (Page 22)

T
roubleshooting
Information
HDMI Control F
unction
Playback
Setup
Getting Started
Speciğcations
19
ENGLISH
2. Playing Back with a Direct Connection to a TV
Check the television’s audio and video terminals and make the connection to one of them.
AUDIO
AUDIO
IN
L R
VIDEO
IN
VIDEO VIDEO
IN
S VIDEO
VIDEO
COMPONENT VIDEO
Y P B P R
IN IN
HDMI
R L
R L
TV
Audio terminals Video terminal S video input
terminal
Component video
input terminal
HDMI input
terminal
TV TV TV TV
(Sold
separately)
When outputting the UD9004’s analog 2-channel audio to the television’s 2-channel (stereo) audio
input terminal, on the GUI menu, select “Audio Setup” – “7.1ch Audio Out”, and set it to “2 Channel”
(vpage 27).
NOTE
Do not connect the UD9004’s video output via a VCR (Video Cassette Recorder). Some media contain
copy prohibit signals, which will disturb the screen image.
When playing NTSC disc, UD9004’s video output becomes NTSC signal format.
When playing PAL disc, UD9004’s video output becomes PAL signal format.
(supplied) (supplied) (Sold
separately)
(Sold
separately)
Connections
When connected to the television’s component video input terminal n
The UD9004’s component video output supports 480i/576i/480p/576p/720p/1080i output. Match the •
output to the corresponding resolution of the connected television by setting, on the GUI menu: “Video
Setup” – “Component Resolution” (vpage 26). Images will not be projected normally if the television
resolution and UD9004’s output resolution do not match. Copyright protected DVD is output in 480i/576i
or 480p/576p.
When connected to the HDMI input terminal n
Outputting both digital video and digital audio signals.
See “Required Settings for HDMI Connection” (vpage 15) for HDMI video output and audio output
settings.