Marantz UD9004 - Manual (Page 35)

T
roubleshooting
Information
HDMI Control F
unction
Playback
Connections
Getting Started
Speciğcations
32
ENGLISH
Setting items Setting contents
Screen Saver
Set the screensaver. Off : Do not use the screensaver.
On : The screensaver function activates when stop or pause status
continues for about three minutes.
Wallpaper
Set to display the background
while playback is stopping. Picture : Displays the MARANTZ logo.
Black : Set the background to black.
Gray : Set the background to gray.
Blue : Set the background to blue.
Still Mode
Set image quality during
pause. Automatic : Display automatically using “Field” or “Frame” per the still
image information.
Field : Set when there is a blurred image when “Automatic” image display
is set.
Frame : Set to display non moving images in high resolution.
Slide Show Time
Sets the display time of
JPEG ğles. 3 ~ 5 ~ 100sec : This sets the display time per frame of a JPEG ğle during
slideshow playback.
Temporary Display
When the display is set to
“Off” by the Dimmer Control
(vpage 49) or Pure Direct
Function (vpage 40), this
sets it to temporarily display
operations received. Off : Do not temporarily display operations.
On : Temporarily display operations.
Captions
This setting output a subtitles
signal to a closed caption
decoder (sold separately). Off : Do not output the closed caption (subtitle) signal.
On : Output the closed caption (subtitle) signal.
Set display-related items.
Display Setup Default settings are underlined.
Setting items Setting contents
Auto Power Mode
This setting automatically
sets the power to standby. Off : Do not use auto power mode.
On : This setting automatically sets the power to standby if any of the
following states continues for approximately 30 minutes.
Disc not loaded •
Playback has stopped •
Stopped due to resume function •
Power Saving
Set power saving mode
during standby. Power Saving Standby : This is the lowest power consumption mode.
During standby, operations are not accepted via HDMI control or RS-
232C.
Normal Standby : This is the low power consumption mode. During
standby, operations are accepted via RS-232C but not accepted by HDMI
control.
HDMI Control Mode : Setting for turning the power on using an external
device’s HDMI control function or by operation via RS-232C. Slightly
higher power consumption.
Quick Start Mode : Start up time is faster but power consumption during
standby is higher.
Remote Control Setting
(Main unit side)
Set the remote control. G Remote ID H
Switches the UD9004’s remote control ID code when other MARANTZ
BD Players are in the vicinity.
• BD 1 : Set the code setting on the remote control to “1” (vpage 7
“Remote Control Setting (Remote Control Side)”).
• BD 2 : Set the code setting on the remote control to “2” (vpage 7
“Remote Control Setting (Remote Control Side)”).
BD Data Utility
Erases data on SD Memory
Card, and initializes cards. BD Data Erase : Erases both internal memory and SD Memory Card
storage.
Initialize SD Card : Initialize the SD card to be used for the Bonus View
function.
NOTE
Insert or remove a SD Memory Card while the power is in standby. •
If you insert a SD Memory Card while the power is ON, the SD Memory
Card may not be read.
The SD card used for the Bonus View function must have a capacity of
•
1GB or greater. Also the SD card must be initialized on the UD9004.
This operation will delete all the data. Do not perform this operation
•
when an SD card containing MP3 or JPEG data is inserted.
Set other items.
Other Setup Default settings are underlined.
Setup
Remote control operation
buttons
SET UP :
Displaying the menu
Cancel the menu
d f 0 1 :
Moves the cursor
(Up/Down/Left/Right)
ENTER :Decision the setting RETURN :Return to previous menu