Marantz UD9004 - Manual (Page 25)

T
roubleshooting
Information
HDMI Control F
unction
Playback
Setup
Getting Started
Speciğcations
22
ENGLISH
Connecting the Power Cord
Connect the included power cord to the UD9004, and plug it into an AC outlet.
Power cord
(included)
To household power
outlet (AC 120 V, 60 Hz)
NOTE
Be sure to insert the power plug ğrmly. Incomplete connection results in noise generation. •
Once Connections are Completed
On the GUI menu, when “Other Setup” – “Auto Power Mode” – “On” (vpage 32), the following states are
maintained for about 30 minutes, and then the power is turned automatically to standby.
Turning the Power On
When power is switched to standby n
Either press POWER ON/STANDBY button on the unit, or press POWER ON/OFF button on the remote
control.
The power indicator lights red.
NOTE
During power standby, a slight amount of power is consumed. To totally cut off the power, remove the
power cord from the power outlet.
Press the unit’s POWER ON/STANDBY button or the
remote control’s POWER ON/OFF button.
“LOADING” appears on the display, and disc information is read.
The “NO DISC” message is displayed when a disc is not loaded. b
(UD9004)
(Remote control
unit)
Disc not loaded •
Playback has stopped •
Stopped due to resume function •
Connections