Muratec F-98 - Manual (Page 30)

Beyond the basics
The EasyStart feature guided you through the “just-gotta” settings on your machine.
In the next few pages, we’ll cover other settings.
Setting up for scans
You can set parameters regarding how your fax machine scans documents for either
faxing or copying:
• Primary transmission mode — Gives you four ways to send faxes, either one
of the three resolution modes — normal, fine or superfine (“S Fine” on the LCD )
— or in grayscale mode (“Gray”).
• Primary contrast mode — Sets how light or dark you want faxed documents
to be when they arrive at their destinations.
1 Press PROGRAM , J , 0, 1, ENTER . The LCD asks which resolution you select:
If the setting you see is acceptable, skip to step 3.
Otherwise, proceed to step 2.
2 To change the setting, press PROGRAM repeatedly until your chosen mode
appears. In this example, we’ve chosen fine resolution.
3 Press ENTER to save the setting. The LCD asks which contrast setting you select:
If the setting you see is acceptable, skip to step 5.
Otherwise, proceed to step 4.
4 To change the setting, press PROGRAM repeatedly until your chosen setting
appears. In this example, we’ve chosen light contrast.
5 Press ENTER to save the setting.
Of course, you always can change the resolution and contrast before sending.
To adjust the resolution and contrast:
• Press
RESOLUTION to change the resolution.
• Press CONTRAST to change the contrast.
Contrast: Light
Program/Enter
Contrast: Normal
Program/Enter
Primary: Fine
Program/Enter
Primary: Normal
Program/Enter
Getting everything just the way you want it
2.2