Muratec F-98 - Manual (Page 64)

Beyond the basics
7 There’s a choice to make. Instruct your fax to carry out this delayed command
in one of the following ways:
Option 1: Perform the command once at a certain time on a certain day of
the month. (For example, “Do this at 5:05
PM on the 30th.”)
To select this option, use the numeric keypad to enter the date
and time when the fax should perform the command:
Option 2: Perform the command at a certain time each day you press the
key. (For example, “Do this at 5:05
PM today.”)
To select this option, use the numeric keypad to enter 0, 0 (i. e.,
00), and then the time when the fax could perform the command:
8 Press ENTER , ENTER .
9 The LCD now displays the next programmable one-touch key.
If you do not want to enter or change any other key’s programming, press STOP
to return your machine to its usual standby mode.
If you do want to enter or change this key’s programming, go back to step 3.
If you want to enter or change another key’s programming, go back to step 2.
Programming a relay broadcast initiation
Note: To erase a programmable one-touch key, refer to page 2.41.
Note: For this operation to work, three things must be true:
• The remote fax machine must be a Muratec fax machine with “hub”
capability.
• The call group(s) you are faxing must exist on the remote machine.
• You must know the two-digit number for each call group you’re faxing.
To program a relay broadcast initiation into a programmable one-touch key:
1 Press PROGRAM , C , 1, ENTER . The LCD either shows:
… or indicates a command already is programmed into this key.
If P 1 is the key you want to program, skip to step 3. (However, our examples
from here will say “ P 5” rather than “ P 1.”)
2 Select the key in which you want to program a command or change a previ-
ously stored command and then press it. Here, we’ve selected
P 5.
3 If you change your mind and wish to select a different programmable one-
touch key, go back to step 2 before going on to step 4.
4 Press ENTER . The LCD now shows either
or
5 Use the numeric keypad to enter the “hub” machine’s number exactly as your
machine should dial it, including whatever codes your phone system may
require. The number can be up to 40 characters in length:
Your display can show only 20 characters at a time. To view characters beyond
those 20 (such as with an international long-distance number), press
to
scroll leftward or to scroll rightward.
Important: Do not press ENTER .
Note: If you make a mistake or want to erase characters entered in a previ-
ous setting, press CANCEL to erase leftward. Or, if you want to change
just one character in the number, press to move the cursor leftward,
or to move it rightward, to that character and press CANCEL to
erase it. Then re-enter until the number is just as you want it.
6 Now, while you still can see the fax number on the LCD , press COM - OPTIONS
two times and then press ENTER . The LCD shows:
Relay Tx
Group No. _
P5:Fax Number
9-5550629
P5:Fax Number
9-5558743 P5:Fax Number
_
Select Program No.
P5:No Number Stored
Select Program No.
P1:No Number Stored
Delayed
Enter Time: 00/17:05
Delayed
Enter Time: 30/17:05
2.36