Setting silent mode – Muratec F-98 User Manual
Page 34
2.6
Beyond the basics
Setting silent mode
If you and your fax machine share a quiet place, you’ll really appreciate being able to
put the machine into silent mode. This setting mutes the ringer, the alarm and the
key-touch tone.
• Ringer — This mutes the ringer and a special ring alerts you if you receive a
voice call and a call request call.
• Alarm — This mutes the alarm your machine makes when an error has
occurred, the “I’m done!” beep your machine makes after sending or receiving a
fax or making a copy, and the beep your machine makes at one-minute intervals
to remind you your caller is waiting.
• Key-touch tone — This mutes the tones your machine makes when pressing
the button on the control panel.
Note: Let’s say it again — silent mode mutes the ringer as well as the beep and
the key-touch tone. So, if you’re using your fax machine as both a fax and
phone (with the optional handset), you may not wish to use this feature.
Note: Of course, turning on the silent mode on your fax machine won’t turn off
ringers on other telephones in your house or office. Similarly, other phones
won’t distinguish between fax and voice calls.
1
Press
PROGRAM
,
J
, 1, 4,
ENTER
. The
LCD
shows your fax’s current setting:
If the setting is “Off” and it is acceptable, skip to step 9.
Otherwise, proceed to step 2.
2
To change the setting, press
PROGRAM
once or twice until your chosen setting
appears. In this example, we’ve chosen On.
Note: Don’t be confused. If silent mode is On, the machine will be quiet.
If silent mode is Off, the machine will ring and beep as usual.
(In other words, the Off/On refers to the silent mode setting,
not to the sound itself!)
3
Press
ENTER
to save the setting. The
LCD
now asks whether you want the
ringer to be off or on:
If the setting you see is acceptable, skip to step 5.
Otherwise, proceed to step 4.
4
To change the setting, press
PROGRAM
once or twice until your chosen setting
appears.
If you want the ringer to be off, set to “On” and the machine will be quiet.
Otherwise, the machine will ring.
5
Press
ENTER
to save the setting. The
LCD
now asks whether you want to be off
the alarm:
If the setting you see is “Off” and it is acceptable, skip to step 7.
Otherwise, proceed to step 6.
6
To change the setting, press
PROGRAM
once or twice until your chosen setting
appears.
If you want the alarm to be off, set to “On” and the machine will be quiet.
Otherwise, the machine will beep.
7
Press
ENTER
to save the setting. The
LCD
now asks whether you want to be off
the key-touch tone
If the setting you see is “Off” and it is acceptable, skip to step 9.
Otherwise, proceed to step 8.
8
To change the setting, press
PROGRAM
once or twice until your chosen setting
appears.
If you want the key-touch tone to be off, select “On” and the machine will be
quiet.
Otherwise, the machine will sound.
9
Press
ENTER
to save the setting.
Key Buz.Silent: Off
Program/Enter
Alarm Silent: Off
Program/Enter
Ringer Silent: Off
Program/Enter
Silent Mode: On
Program/Enter
Silent Mode: Off
Program/Enter