Moxa Technologies DE-334 - Manual (Page 111)

NPort Server Lite User’s Manual A-1
A A
A. Telnet Console
This appendix contains instructions and illustrations that explain how to use Telnet Console
Interface. The following discussion and examples were generated by running Telnet from a
Windows NT/95/98 host.
Starting Telnet
From the Windows NT/2000/95/98 desktop click on Start and then choose Run.
As shown below, type
telnet [NPort Server Lite IP address]
in the Open text box, where [NPort Server Lite IP address] is the NPort Server
Lite’s IP address, and then click OK to begin the Telnet session.