Moxa Technologies DE-334 - Manual (Page 48)

4-22
NPort Server Lite User’s Manual
Delete Server
If one of the NPort Server Lites originally installed on your system has been moved, or you
do not need the server installed on your system anymore, then you can use NPort Server
Lite Manager to delete it. First highlight the name of the server you would like to remove,
and then click on the toolbar Delete Server button.
Map Port
You may use NPort Server Lite Manager to change previously assigned COM names.
There are two options, depending on whether you want to change all port names
consecutively or only want to change one port name. Click on the Map Port toolbar
function, and then take the following steps:
Change the COM name of only one port
1. Start NPort Server Lite Manager, and then
click on the name of the server, listed in
the left info box, whose port number you
would like to change.
2. The port on this particular server will be
listed in the right info box. Click on the
port to highlight it.
3. Click on the toolbar Map Port icon.
4. Select the new COM port name you would
like to map to.
Make sure the Mapping COM number
consecutively check box is not checked.
5. Click OK to finish.